Logo
 

DX52

PW1


PW1   Additive for motor used vegetable oils under cold conditions to increase flowability in diesel engines also taking effect against polymerisation ahead of time in motor-oil.
PW1   a biogenous additive, especially developed to bring down the pour point of plant oils being used in low temperature. Plant oil will get more capable of flow.
PW1   reduces viscosity so the ignitability of plant oil will be increased. Combustion of thin-fluid plant oil is much better then.
PW1   acts against polymerisation of motor oil (densification because of unburnt plant oil-residue). Already 1% permanent addition improves running life of motor oil.


Associated with a variable portion of commercial diesel fuel you can use plant oil all-the-year to a greater extent (depending on kind of motor und plant oil sort).
So the application of PW1 also makes sense in motors being changed over to 1-tank- or 2-tank-system.

You should add 1 - 3% (up to max. 9%) relating to the plant oil fraction.

PW1   in principle, can be added for bettering flowability, ignitability and so to improve the combustion. Particularly in association with DX 52 - fuel combustion additive - you will get an ideal coaction. (Using 3% PW1 you have to dose max. 2% DX 52)
PW1   is based on renewable and biogenous material and so has a share in saving sustainable mobility.
PW1   can also be used as cleaner for car-parts (special information).


Against the particular vegetable oil and the addition amount of PW1 the pour point of plant oil (rape seed oil with about 50% diesel fuel) can be reduced down to - 25°C.
Please take note of our scheme (pour points with PW1) providing information also about particular kind of plant oil. Please keep in mind: About 5°C before reaching the pour point, plant oil will get too thick to be pumped and for priming.

Therefore we advise the addition of PW1 accurately timed before cold snap and at least 5°C before reaching the favoured pour point.

Specific advice: PW1 can be dosed right into the tank!

In vehicles equipped to run with pure plant oil, maybe together with DX 52, PW1 can be added directly into the (plant oil) tank.
Protection against cold will occur as soon as there will be mixture by driving/motor activity.

PW1 is exclusively designed for the limited purpose in motors!
Plant oil with PW1 is not suited for food in any case!
Storage container have to be accordingly marked and protected against the access of consumers especially children! Please take note of our safety-related hints for transport and storage.

PW1   Additive for motor used vegetable oils under cold conditions to increase flowability in diesel-engines
PW1   especially developed to increase flowability of plant oil used particularly in low temperature.
PW1   acts against polymerisation of motor-oil because of unburned residue.
With PW1 you can use higher percentage of plant oil in vehicles not converted to run with pure plant oil. 3% PW1 substitutes with regard to viscosity about 10% mineral diesel-fuel.
PW1   is an ideal supplement to DX 52 fuel combustion additive for plant oil. Using 3% PW1 you have to dose max. 2% DX 52!
PW1   Protection against cold will occur as soon as there will be mixture by driving/motor activity. So we recommend use early enough!
PW1   acts against polymerisation of motor-oil because of unburned residue.


Best cold protection you get by adding 9% PW1 relating to the plant oil fraction.
To improve flowability und protect motor oil against densification you should add a permanent percentage of 1-3% PW1.
Pour point of rape seed oil with 3% PW1 in mixture with 50% diesel fuel can be reduced from -12 down to -20 °C.

Prices on demand.